重新上报数据

方法一:手动执行脚本

  1. UPDATE GAT_STATION SET SYNC_FLAG = 0 WHERE GAT_CODE = '66246603b9270991335db4e5372afpan';
  2. UPDATE GAT_DEVICE SET SYNC_FLAG = 0 WHERE GAT_CODE = '66246603b9270991335db4e5372afpan';
  3. UPDATE GAT_zone SET SYNC_FLAG = 0 WHERE GAT_CODE = '66246603b9270991335db4e5372afpan';
  4. UPDATE GAT_program SET SYNC_FLAG = 0 WHERE GAT_CODE = '66246603b9270991335db4e5372afpan';
  5. UPDATE GAT_GATWAY SET SYNC_FLAG = 0 WHERE GAT_CODE = '66246603b9270991335db4e5372afpan';

方法二:后台功能界面,需要 v1.0.14

数据上报到云端 - 图1

改变上报服务器地址

  • 用记事本打开文件 D:\SATLIC.COM\SATLIC.CONFIG\CLOUD\Configs\CloudSetting.json
  • 修改地址

    开发服务器

    1. {
    2. "SupersocketMqttCloud": {
    3. "ServerAddress": "debug.satlic.net",
    4. "ServerPort": 8991,
    5. "License": ""
    6. }
    7. }

测试服务器

  1. {
  2. "SupersocketMqttCloud": {
  3. "ServerAddress": "test.satlic.net",
  4. "ServerPort": 8111,
  5. "License": ""
  6. }
  7. }

正式服务器

  1. {
  2. "SupersocketMqttCloud": {
  3. "ServerAddress": "api.satlic.net",
  4. "ServerPort": 8111,
  5. "License": ""
  6. }
  7. }